To configure your Siemens telephone connect it to your router using the provided RJ45 cable. Attach the power lead and switch on.

At this point you can choose to use the automated wizard on the handset or use the web based setup. The following instructions will guide you through the web based setup procedure.

To access the web based setup, you will need to determine the IP address of the phone. To do this you will need the handset. On the handset select 'menu > settings > base > network > IP address. The display will show you the current IP address of the phone.

Now you have obtained the IP address you can enter this address in a web browser to access the web configuration page.

Enter the default system pin of '0000' and click ok. Once logged in you will be shown a menu. Select the 'Settings' option and then 'Connections'. Select the first SIP Account 'Edit' button. You will be shown the following screen:

Please enter the following details into the fields provided:

- SIP:
Authentication Name: <extension username>
Authentication Password: <extension password>
Username: <extension username>
Domain: sip.voicehost.co.uk
Display Name: <your name>
Proxy server address: sip.voicehost.co.uk
Proxy server port: 5060
Registrar server: sip.voicehost.co.uk
Registrar server port: 5060

- Network:
STUN enabled: yes
STUN server: stun.voicehost.co.uk
STUN port: 5000
NAT refresh time: 20 seconds
Outbound proxy mode: Auto
Outbound proxy port: 5060

- Voice codecs:
VoIP volume: Normal
Enable Annex B for G729: No
Selected codecs: G711 ulaw and alaw

Once the above details have been entered select the 'Set' button to save your settings.

To make sure that your 'touch tones' or DTMF will work correctly, select the 'Advanced Settings'. You will be show the following screen:

Change the 'DTMF over VoIP Connections' to 'SIP Info' with all other options unticked. Click 'Set' to compleet the setup process.

Once the phone registers, you will be able to start making calls.

To check you are connected to the VoiceHost network dial '1234' which will play you a welcome message.

Now you have setup your device, you can make calls in the normal way.

Remember you need to dial the full number including the area code, however the country code is not required if calling the UK.

If you can not find the answer to your question in the above sections, please contact support via our contact pages.