Trixbox Configuration
VoiceHost can be used as an inbound and outbound trunk to connect your Trixbox to the PSTN and VoIP networks. To add VoiceHost as a trunk on your trixbox, please follow the instructions below:
1.) Login to the Trixbox web interface and select 'Trunk'
2.) Select 'Add Trunk'
3.) Enter the following details:
| General Settings: | |
| Outbound Caller ID: | <your telephone number> |
| Maximum Channels: | 10 |
| Outgoing Settings: | |
| Trunk Name: | VoiceHost |
| PEER Details: | host=sip.voicehost.co.uk |
| Incoming Settings: | |
| USER Context | <Your Extension Username e.g 1XXXX*2XX> |
| USER Details: | username=<Your Extension Username e.g 1XXXX*2XX> secret=<Extension Password> type=user disallow=all allow=ulaw,alaw,gsm context=from-trunk |
| Registration: | |
| Register String: | <Extension Username>:<Extension Password>@sip.voicehost.co.uk |
4.) Once you have your Trunk configured make sure you set your extension to 'Trunk Mode' in the extension configuration screen from within the control panel. This setting allows the telephone number to be passes as a DID which you can use to route calls in the 'Incoming Routes' section of trixbox.
If you require any assistance configuring VoiceHost for use with trix box, please feel free to contact support using our Contact pages.
FREE SoftphoneFREE 0844 Number 
