Skip to main content
Polycom IP SoundPoint Configuration

Polycom IP SoundPoint Configuration

Manually Provisioning Your Polycom VoIP Phone:
  1. From the phone's local menu interface, press Menu > Settings > Advanced (default password: 456) > Administration Settings > Network Configuration > Server Menu.
  2. Configure your DHCP menu:

On 3.x Phones: Main Menu > Settings > Advanced > Admin Settings > Network Configuration > DHCP Menu
On 4.x/5.x phones: Main Menu > Settings > Advanced > Admin Settings > Network Configuration > Provisioning Server > DHCP Menu set the following:

Boot Server: Static

BootSrv Type: IP Address  (Once phone is upgraded, please remove the IP address from the phone!!!)

  1. From the Provisioning Server menu set: Server Type: HTTP
  2.  Next input Server Address 
    1. Note address can only be entered in IP form, enter:Example 37.xx.xx.xxx for convenience.
    2. Unless otherwise instructed by Support, do not change Server User or Password.

(Optional): Specify a directory for the SIP or UC software version you wish the phone to provision, as listed below.

IMPORTANT NOTE: Using this server to provision your phone will erase all preferences and will restore all settings to their Factory Default Values! ALL SETTINGS WILL BE LOST!!